How Can I Setup HP Wireless Printer? Access 123.hp.com/setup


Setting up an HP Wireless printer at your home and office is not as much difficult as you are thinking. When you read the blog-post, you can effort-freely set up your printer in just a second.

.

Setting up an HP Wireless printer at your home and office is not as much difficult as you are thinking. When you read the blog-post, you can effort-freely set up your printer in just a second.

 

Have you recently bought an HP wireless printer? If yes, then you first need to set up your printer properly at your office premises as only then you will be applicable to take a printout or scan or fax the document. For non-tech or newbie, it would be quite tough to first-time setup printer, that’s why we provide the link 123.hp.com/setup through which anyone can take proper guidance to complete the setup process in a more efficient way. Moreover, you can read the blog as this document is for the users who are looking for a printer setup guide.

 

To set up your printer for the very first time, you first have to remove all the package materials, connect the power cord, install the ink cartridges, and then load the paper in the input tray. Here you can see how to do all these things in a handy manner. Hence, feast your eyes!

 

Step 1: Unpack The Printer From The Box

 

First, you have to ensure that the list of items has been shipped with a printer package. Now, follow the below lines:

  • Remove the printer from the box
  • Place it at a surface table

 

  • Remove all the tape, stickers and packaging materials from the outside and inside of the printer

 

Step 2: Connect The Power Cord And Turn-on Your Printer

 

After that, you have to plug the printer into a power source to turn on the printer. Here are ways to do such a thing:

 

  • Connect the power cord to the rear of the printer and then plug the other end of the power cord into an electrical outlet

 

  • Press the Power button on your printer to turn it ON

 

Step 3: Install The Ink Cartridges

 

Once the printer is turned on, try to install the ink cartridges for all the slots.

 

Follow the given steps for doing it in the right way:

 

  • Hold the handle and lower the ink cartridge access door to open it

 

  • Remove carefully one of the ink cartridges from its package

 

  • Remove the plastic tape from there

 

  • Hold the ink cartridge by its sides with the nozzles toward the printer and then insert the ink into its slot

 

  • Slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push up on the ink cartridge until it adjusts into its place

 

  • Repeat these steps for all ink cartridges

 

  • Once all done, close the ink cartridge access door

 

Step 4: Load Paper Into The Input Tray

 

Now, it’s time to load the stack of white paper inside the paper tray. Here is the step you need to go through:

 

  • Lift-up the input tray

 

  • Remove any paper from the input tray that is different from the type of paper you want to load

 

  • Now, load a stack of U.S. letter, A4, or legal size paper into the input tray with the short edge forward and the print side facing closest to you. Push the stack into the tray until it stops

 

  • Slide the paper width guide to the right until it fits at the edge of the paper
  • Lower the output tray and pull out the output tray extender

 

Step 5: Align The Ink Cartridges

 

For getting the best quality of printouts, it is essential to align the ink cartridges. Here are the ways you have to follow:

 

  • After loading the paper, the printer automatically prints an alignment page
  • Lift the scanner lid

 

  • Place the alignment page with the print side down on the scanner glass and then position it according to the inscribed guides around the glass

 

  • Close the scanner lid

 

  • Press the Start Copy Black button or the Start Copy Color button on the control panel of the printer

 

  • The printer aligns the ink cartridges and start delivering the high quality of printouts of your document

 

Step 6: Steps To Setup HP Wireless Printer

 

After completing these above guides, now you are allowed to set up your HP wireless printer. Follow the stepwise directions mentioned underneath for 123.hp.com/setup:

 

  • First, make sure your printer is turned on

 

  • Now, you can use the touchscreen in the wireless printer to connect your wireless network

 

  • On the touchscreen, press the right arrow key and tap on “Setup” option
  • Select “Network” from the setup menu

 

  •     Choose Wireless Setup Wizard from the Network menu, it will search for the wireless routers in the range

 

  • Select your Network (SSID) from the given list

 

  • Enter the WEP/WPA Passphrase for the network and then click “Done”

 

  • Press OK to confirm the settings

 

  • Press OK to print the wireless report or Skip if you don’t want

 

123.hp.com/setup: For More Detail Dial Helpline Number

 

Don’t get panic! If you are facing problem in setting up your HP Printer with the above-written instructions as there are well-trained technicians for your better help. You only need to contact them through helpline number and obtain the relevant ways for 123.hp.com/setup printer setup.

 

Sourceurl:- https://hpsetupanytimesupport.blogspot.com/2020/05/how-can-i-setup-hp-wireless-printer.html

588 Views

Comments